Ultrasonic Heat Exchanger Timer Heater With Baskets
1.Why Do You Need Ultrasonic Heat Exchanger Cleaner
Heat Exchanger Usually clean their Heat Exchanger once a week but mostly get trouble in cleaning. There are many hard cleaning components in a Heat Exchanger and it is not easy to clean by hand.
However, ultrasonic Heat Exchanger cleaner will do all cleaning job for you and you just need to wait several minutes.
It clean every parts of your Heat Exchanger and it keep same intensity in every direction.
2.Advantage Of Ultrasonic Heat Exchanger Cleaner.
- More thorough cleaning- cleans down to one micron cleanliness level
- Shorter cleaning times- 3-5 minutes for most firearms
- Less handling- allows the user to perform other functions while cleaning is in process
- Lubrication tank design uses ultrasonic energy allowing complete coverage in every crack and crevasse
- Cleaning detergent is specifically chosen for Heat Exchanger cleaning and includes a rust prohibitor
- Lubrication is specially formulated for Heat Exchanger cleaning with water displacement and low temperature properties
3.How Heat Exchanger Cleaner Work?
Ultrasonic transducers mounted to the tank bottom produce high frequency sound waves which cause rapidly alternating high & low pressure conditions in the cleaning solution. Millions of microscopic bubbles form and then implode (a process called cavitation) resulting in an intense scrubbing action that removes fouling even in the smallest indentations, grooves and impossible to reach by hand areas.
Using water based detergents with rust inhibitor and heat, unburned powder, carbon, lint, oil & dirt will be quickly removed from the field stripped gun parts usually within 4-6 minutes of immersion with minimal hand labor. Heated ultrasonic cleaning, followed by rinsing and ultrasonic lubrication with supplied lube pan and special oil, insures that the parts are moisture free and protected. After excess lubricant is removed from the parts with compressed air, they can be lubricated in accordance with manufacturer's instructions or your S.O.P.
The parts are then restored to factory new level of cleanliness which could not be achieved by the usual hand cleaning methods. The process does not affect night sights, rubber grips, and plastic frames or leave the parts dried out and unprotected.
4.How To Clean Your Heat Exchanger With Ultrasonic Cleaner.
(1). Heat Exchanger
(2.) Swab the bore with a good defouler like Hoppes #9
(3). Insert the stainless steel basket into the ultrasonic cleaning system
(4.) Insert the polycarbonate tray into the stainless steel basket Ride The Waves Ultrasonic Heat Exchanger Cleaning Equipment
(5). Add cleaning solution concentrate Cleaning Solution
(6). Turn heating unit on to 50 degrees C
(7). Insert Heat Exchanger parts into the ultrasonic cleaner
(8). Set the cleaning time for between 5 and 30 minutes, depending on how dirty the Heat Exchanger is. (Light maintenance on the lower end of the time scale, heavy cleaning on the higher end of the time scale.)
(9). Turn the ultrasonic cleaner on
(10). Check guns periodically for cleanliness
(11). When clean, turn off heat and the ultrasonic unit
(12). Swab the bore with a good defouler like Hoppes #9
(13). Always lubricate your gun after cleaning
5.Feature Of JTS-1010 Ultrasonic Heat Exchanger cleaner
- All stainless steel - ensures many years of trouble free performance
- The most advanced transducer design in the industry
- Simultaneous technology - provides the highest performance of any system
- eliminates standing waves and provides a safe cleaning environment for all Heat Exchanger surfaces
- Best warranty in the industry - you talk directly to our support staff who designed and built the system
- Two Cleaning Process To Provide Detail care for your Heat Exchanger,including rough and precision cleaning.
- Degas Function will improve cleaning effect and reduce oxidation on your Heat Exchanger parts.
6.Specidication of JTS-1010 Ultrasonic gun clenaer
| Model | JTS-1010 | Frequency | 40,000Hz |
| Tank capacity | 30L | Timer | 1-99 mins |
| Tank size | 90.8 x 20.5 x 15.9 cm | Unit size | 97.8 x 27.3 x 35.6 cm |
| Box packing | 114.3 x 38.1 x 44.5 cm | Function | Degasing/Draining |
| Ultrasonic power | 600W | Heating power | 500W |
| N.W. | 33kg | G.W. | 35kg |
| POWER SUPPLY | AC 100 ~ 120V, 60Hz ; AC 220 ~ 240V, 50Hz
|
7.Detail picture ultrasonic Heat Exchanger cleaner
Remark:
1. tank size and other functions can be custom made
2. customer logo is acceptable
3. packing by wooden case
4. lead time is negotiable according to qty. and custom made requirements
FAQ
Q: What's the advantage of Skymen ultrasonic Heat Exchanger cleaner?
A: Skymen ultrasonic cleaner is the best way to have thorough cleaning without damaging objects. It helps to remove stubborn dirt and dust from the watch, eyeglasses, jewelry, etc, make them look new once again. It's very safe and easy to operate, proves to be the best helping hand for you at home.
Q: How often should I change the cleaning fluid in my tank?
A: Changed whenever it becomes visibly too contaminated, or when the cleaning process is not as effective.
Q: Why do I need to use a basket?
A: Basket would help to load objects together, and get a better cleaning effect.
Q:Can ultrasonic cleaning damage parts?
A: Although the effect of thousands of implosions per second is very powerful, the cleaning process is safe. No damage to your daily objects.
Q: What about the warranty?
A: 1 Year warranty for Skymen ultrasonic cleaner. If any technical problem during warranty time, replacement parts will be sent free of charge. And technical support is also available after 1 year.
Product Tags:
|
|
Ultrasonic Heat Exchanger Cleaner with Lid Manual Instruction and Degas Function for Efficient Cleaning Images
|
